|
Digital Multimeter
CD800, CD801
Best seller
DMM 3200 count display with Analog Bar Graph
* CD801 - with 10A
|
| |
Introduction:
This is a case-integrated
DMM provided with both a digital bar graph of 3,200 counts
and an analog bar graph display.
In the digital display mode, small numerical values up
to 3,200 counts can be read, while in the analog display
mode, it is suitable for reading rough values.
The case is of an integrated-type, and a 3-way type of
"use", "carry", and "store" high functions (performance).
The tester is provided with devices for the use suitable
in any time and place, is shock-proof, and has full durability,
additionally meeting International Standard for Safety
IEC1010.
The tester features a cover made of a flammability, test
leads, and consideration is made for structure design
of test leads, putting emphasis on safety in high voltage
measurement. |
| |
| |
Features:
| 1. |
Wide dynamic range of 3200 count display
and an analog bar graph. |
| 2. |
With a magazine for storing the test
leads. |
| 3. |
Hard-burn material is used on the
rear case. |
| 4. |
A space is provided for setting a
flat chip resister, that makes easier to measure
the flat chip resister, of which respective sizes
are1.6mm (L) * 0.8mm(W), 2mm(L) *1, 25mm(W) and
3.1mm(L) x1.55mm(W). |
| 5. |
With a handy hand strap. |
| 6. |
In conformity with IEC1010. |
| 7. |
Data hold function to hold measured
value. |
| 8. |
10A range (CD801 only). |
|
| |
| |
General Specification:
| Operating
principle |
Dual slope integration |
| Display |
3200 counts in LCD |
| Bar Graph |
32 segments max. |
| Range switch |
Auto range |
| Over display |
"OL" mark indication |
| Polarity switch-1 |
Auto |
| Low battery indication |
"BT" symbol |
| Sampling |
Approx.2 times/sec |
| Bar Graph 2 |
Approx.12 times/sec |
| Accuracy guaranteed
temperature& humidity ranges |
18~25ºC, 80%R.H. Max. No condensation |
| Operating temperature&
humidity range |
0~40ºC, 80%R.H. Max. No condensation |
| Storage temperature
humidity range |
-10~50ºC, 70%R.H. Max. No condensation |
| Power supply |
R6 x 2 |
| Consuming power |
Approx.1.8mW Typ |
| Operating time |
750 hours |
| Dimension |
176 * 104 * 46mm (CD800)
176 * 104 * 51mm (CD801) |
| Weight |
Approx. 340g (CD800)
Approx. 430g (CD801) |
| Instruction manual |
English |
| Test lead |
TL-61T (CD800)
TL-63 (CD801) |
| Safety approval |
In conformity with
IEC1010 |
|
| |
| |
Measurement Range And Accuracy:
| Function |
Range |
Accuracy |
Resolution |
Input
resistance |
Remarks |
|
DCV |
320mV |
±(0.8%rdg+2dgt) |
100µV |
100MW |
- |
| 3.2V |
| 32V |
| 320V |
| 600V |
|
ACV |
3.2V |
±(1.8%rdg+4dgt) |
1mV |
11MW |
Accuracy
in the case of sine wave AC : 45...400Hz |
| 32V |
| 320V |
| 600V |
|
DCmA |
32mA |
±(1.3%rdg+2dgt) |
10µA |
5W |
- |
| 320mA |
| 10A |
CD801 only |
|
ACmA |
32mA |
±(2.0%rdg+5dgt) |
10µA |
5W |
Accuracy
in the case of sine wave AC : 45 to 400Hz |
| 320mA |
| 10A |
CD801 only |
|
RESISTANCE |
320W |
±(1.2%rdg+2dgt) |
100mW |
Open
circuit voltage : Approx. 1.3V
The measuring current changes according to the
resistance of the resistor to measure. |
| 3.2kW |
| 32kW |
| 320kW |
| 3.2MW |
| 32MW |
| CONTINUITY |
Buzzer sounds at
approx. 20W max. |
| DIODE
TEST |
Open circuit voltage
: Approx. 3V |
|
 |
|
|
| Page
Top ^^ |
|
|
|
