|
Digital Multimeter
PC520M
Handheld Data
Logger DMM
Temp Measurement
43,000 logged data kept in built-in Memory
|
| |
Standard Accessory:
| 1. |
PC520M x 1 |
| 2. |
Holster (H-50) x 1pc. |
| 3. |
Test Leads (TL-82) x 1set |
| 4. |
Alligator Clip (CL-13) x 1set |
| 5. |
Thermocouple (K-250PC) x 1pc |
| 6. |
Instruction Manual x 1pc |
|
| |
| |
Optional Accessory:
| 1. |
Clamp Probe (CL33DC) |
| 2. |
Clamp Probe (CL-22AD) |
| 3. |
Clamp Probe (CL-20D) |
| 4. |
K-type adapter (K-AD) |
| 5. |
Carrying Case (C-CD) |
| 6. |
RS-232C cable (KB-RS2) |
| 7. |
Software (PC Link / PC Link Plus) |
|
| |
| |
Features:
| 1. |
AC True RMS |
| 2. |
Fast Response (5 times / sec. in digit
and 60times / sec. in bargraph) |
| 3. |
Selectable 5 sensitivity for Frequency
measurement |
| 4. |
Capacitance measurement 0.01nF up
to 9999uF |
| 5. |
K-type temperature measurement –50oC
~ 1000oC |
| 6. |
Auto Lead Resistance Calibration |
| 7. |
0.08% Basic Accuracy at DCV function |
| 8. |
High resolution: 0.01 ohm, Voltage
0.01mV |
| 9. |
Data Logging Mode: |
| 10. |
43,000 data can be kept in built-in
memory. |
| 11. |
Call and Scrolling logged data |
| 12. |
Search MAX MIN data |
| 13. |
Search MAX & MIN data at turning
point |
| 14. |
Interval selection: |
|
ACV, DCV, ACA, DCA: 0.05s, 1s, 20s,
40s, 1min, 2min, 4min, 8min
oC & ohm: 0.2s, 1s, 20s, 40s, 1min, 2min,
4min, 8min
Hz: 0.4s, 1s, 20s, 40s, 1min, 2min, 4min, 8min |
| 15. |
Automatic Standby mode during data
logging to extend Battery life |
| 16. |
Automatic stopping data logging mode
when batteries are low to guarantee accuracy of
every logged data |
| 17. |
Download data logged to PC through
RS232 port. |
| 18. |
RS-232C Interface |
| 19. |
Data hold |
| 20. |
Auto power off (Enable or Disable) |
| 21. |
Fast response Cont. Buzzer |
| 22. |
Tilt stand |
| 23. |
Set off Beeper function |
|
| |
| |
General Specification:
| Measuring Method |
|
| Display Counter |
5000 counts
Bar graph 52 segments max. |
| Range Selection |
Auto and Manual ranges |
| Over Display |
"O.L"mark indication |
| Polarity |
Automatic selection(only"-"is displayed) |
| Low Battery Indication |
|
| Sampling Rate |
| Numeral display |
Approx.5times/sec |
| Bar graph |
Approx.60times/sec |
|
| Accuracy Temperature |
18~28ºC 75% RH max. No condensation |
| Operating Temperature |
0~50°C 70% RH max. No condensation |
Storage Temperature
(Battery removed) |
-20~60°C 80% RH max. No condensation |
| Environmental Condition |
Operating altitude < 2000m, Pollution degree
II |
| Power Supply |
6LF22 x 1 |
| Power Consumption |
Approx. 5mA typical |
| Auto Power Off Timing |
17min |
| Fuse Protection |
0.63A/250V 5x20mm IR 1.5kA
12.5A/500V 6x32mm IR 20kA |
Dimension and Weight
(including Holster) |
179(H) x 87(W) x 54(D)mm, approx. 430g |
| Accessories |
Instruction manual x 1
Holster(H-50)x
1
Test lead(TL-82) x 1set
Thormocouple (K-250PC) x 1
Alligator Clip (CL-13) x 1set |
| Safety |
IEC 1010-1 CAT III Max.600V, CAT II Max. 1000V |
| E.M.C. |
EN50081-1, EN50082-1 |
|
| |
| |
Measurement Range And Accuracy:
|
Range |
Accuracy |
| Function-DCV |
| 50.00mV |
±(0.12%rdg+2dgt) |
| 500.0mV |
±(0.06%rdg+2dgt) |
| 5.000V |
±(0.08%rdg+2dgt) |
| 50.00V |
| 500.0V |
| 1000V |
| Function-ACV |
| Bandwidth |
50~60Hz |
40~500Hz |
up
to 20kHz |
| 50.00mV |
±(0.5%rdg+5dgt) |
±(0.8%rdg+3dgt) |
0.5dB |
| 500.0mV |
| 5.000V |
±(1%rdg+4dgt) |
3dB |
| 50.00V |
| 500.0V |
| 1000V |
±(1.0%rdg+40dgt) |
Unspec'd |
| Function-W |
| 50.00W |
±(0.4%rdg+6dgt) |
| 500.0W |
±(0.2%rdg+3dgt) |
| 5.000kW |
±(0.2%rdg+2dgt) |
| 50.00kW |
| 500.0kW |
| 5.000MW |
±(1.0%rdg+3dgt) |
| 50.00MW |
±(1.5%rdg+5dgt) |
| Open Voltage: <1.3VDC, <3VDC for
50W&500W range |
| Function-Capacity |
| 50.00nF |
±(0.8%rdg+3dgt) |
| 500.0nF |
| 5.000µF |
±(1.0%rdg+3dgt) |
| 50.00µF |
±(2.0%rdg+3dgt) |
| 500.0µF |
±(3.5%rdg+5dgt) |
| 9999µF |
±(5.0%rdg+5dgt) |
| Function-DCA |
| 500.0µA |
±(0.2%rdg+4dgt) |
| 5000µA |
| 50.00mA |
| 500.0mA |
| 5.000A |
| 10.00A |
| Function-ACA |
| Bandwidth |
50~60Hz |
40~1kHz |
|
| 500.0µA |
±(0.6%rdg+3dgt) |
±(0.8%rdg+4dgt) |
| 5000µA |
| 50.00mA |
| 500.0mA |
±(1%rdg+3dgt) |
±(1.0%rdg+4dgt) |
| 5.000A |
±(0.6%rdg+3dgt) |
| 10.00A |
| Frequency |
| 5.000Hz~125kHz |
±(0.01%rdg+2dgt) |
| Temperture(PC520M/PC510) |
| -50ºC~1000ºC |
±(0.3%rdg+3dgt) |
| Continity buzzer |
Buzzer sounds at between 20W~120W
Open voltage: Approx. 3V |
| Diode test |
| Open voltage: Approx. 3.5V |
|
| |
| |
Function:
|
50000 &
500000 count |
5000 count |
| PC5000 |
PC520M |
PC510 |
PC500 |
| Best Accuracy in DCV |
0.03% |
0.08% |
0.08% |
0.08% |
| Built-in Memory 43,000points |
|
 |
|
|
| PC Link system (RS232
interface) |
|
|
|
|
| True RMS |
|
|
|
|
| Capacitance |
|
|
|
|
| Frequency |
|
|
|
|
| Logic Frequency |
|
|
|
|
| Temperture K-type |
|
|
|
|
| Temperture Platinic
thin film (Optional) |
|
|
|
|
| 0.01 mV resolution |
|
|
|
|
| 0.01 ohm resolution |
|
|
|
|
| Auto leads calibration
for low ohm range |
|
|
|
|
| dBm measurement |
|
|
|
|
| Duty Cycle |
|
|
|
|
| %4-20mA |
|
|
|
|
| Diode test |
|
|
|
|
| Continity buzzer |
|
|
|
|
| MAX / MIN Recording |
|
|
|
|
| MAX / MIN Capture
(Peak hold) |
|
|
|
|
| Zoom Bargraph |
|
|
|
|
| Data Hold |
|
|
|
|
| Relative measurement |
|
|
|
|
| Auto Range |
|
|
|
|
| Range hold |
|
|
|
|
| Auto Power Off
(Enable or Disable) |
|
|
|
|
| Alarm for mis-pulg
for Current range |
|
|
|
|
| Set off Beeper |
|
|
|
|
| Tilt stand |
|
|
|
|
|
 |
|
|
| Page
Top ^^ |
|
|
|
